P0107: MAP Circuit Low Input

P0107 is an OBD2 diagnostic trouble code: MAP Circuit Low Input. Learn what it means, why the check engine light comes on, and what to check next.

Educational OBD2 information. Confirm on your vehicle with a scan tool. MotorBit can read this code, freeze frame, and live data over an ELM327 adapter.

What P0107 means

P0107 (MAP Circuit Low Input) is stored when the vehicle control module fails a related monitor. The exact sensor or circuit depends on the manufacturer, but the SAE title above is the standard meaning.

Why the check engine light comes on

The malfunction indicator lamp (check engine light) is commanded on because the module detected a condition outside its emissions or drivability limits. Some codes barely affect how the car drives; others can cause limp mode or catalyst damage if you keep driving hard.

Common causes

• Failed sensor or actuator named in the code title
• Wiring or connector corrosion
• Vacuum, exhaust, or mechanical issue that makes the sensor reading implausible
• Low battery voltage causing false network/sensor codes

Typical symptoms

• Check engine light on (steady or flashing)
• Possible rough running, poor fuel economy, or warning lamps on related systems

What to do next

1. Scan stored, pending, and freeze-frame data with MotorBit.
2. Do not clear the code until you have recorded freeze frame — that snapshot is the best clue.
3. Fix the root cause, then clear and confirm monitors complete.
4. If the code is network-related (U-codes) or crank/cam (no-start), test the battery first.

How MotorBit helps

Open MotorBit, connect your ELM327, and read P0107 with freeze frame (RPM, load, temperature, speed at the moment the fault set). Then watch live PIDs and fuel trims instead of replacing parts by guesswork. When the repair is verified, clear the code and re-check monitors.

Download MotorBit on the App Store

FAQ